neiye11

News

News

  • Two common problems in glaze debugging and use

    In the process of debugging and using glazes, in addition to meeting specific decorative effects and performance indicators, they must also meet the most basic process requirements. We list and discuss the two most common problems in the process of using glazes. 1. The performance of glaze slurry...
    Read more
  • Use and Contraindications of Carboxymethyl Cellulose

    Mix sodium carboxymethyl cellulose directly with water to make a pasty glue for later use. When preparing sodium carboxymethyl cellulose paste glue, first add a certain amount of clean water into the batching tank with mixing equipment, and sprinkle sodium carboxymethyl cellulose slowly and evenl...
    Read more
  • Cellulose Binder—Carboxymethyl Cellulose (CMC)

    Carboxymethyl Cellulose (Sodium Carboxymethyl Cellulose), referred to as CMC, is a polymer compound of surface active colloid. It is an odorless, tasteless, non-toxic water-soluble cellulose derivative. The obtained organic cellulose binder is a kind of cellulose ether, and its sodium salt is gen...
    Read more
  • Super Viscosity CMC

    CMC is white or milky white fibrous powder or granules, with a density of 0.5-0.7 g/cm3, almost odorless, tasteless, and hygroscopic. Easily dispersed in water to form a transparent colloidal solution, insoluble in organic solvents such as ethanol. The pH of 1% aqueous solution is 6.5 to 8.5. Whe...
    Read more
  • Application of CMC Binder in Batteries

    As the main binder of water-based negative electrode materials, CMC products are widely used by domestic and foreign battery manufacturers. The optimal amount of binder can obtain relatively large battery capacity, long cycle life and relatively low internal resistance. Binder is one of the impor...
    Read more
  • Classification of Cellulose

    01 Hydroxypropyl Methyl Cellulose 1. Cement mortar: Improve the dispersion of cement-sand, greatly improve the plasticity and water retention of mortar, have an effect on preventing cracks, and enhance the strength of cement. 2. Tile cement: improve the plasticity and water retention of pressed t...
    Read more
  • Additives for glazed tiles

    01. Properties of sodium carboxymethylcellulose Sodium carboxymethyl cellulose is an anionic polymer electrolyte. The degree of substitution of commercial CMC ranges from 0.4 to 1.2. Depending on the purity, the appearance is white or off-white powder. 1. The viscosity of the solution The viscosi...
    Read more
  • Application of CMC in Petroleum

    Petroleum grade CMC model: PAC- HV PAC- LV PAC-L PAC-R PAC-RE CMC- HV CMC- LV 1. The functions of PAC and CMC in the oil field are as follows: 1. The mud containing PAC and CMC can make the well wall form a thin and firm filter cake with low permeability, reducing the water loss; 2. After adding ...
    Read more
  • Petroleum grade high viscosity CMC (CMC-HV)

    As a water-soluble colloid in the drilling mud system, CMC has a high ability to control water loss. Adding a small amount of CMC can control the water at a high level. In addition, it has good temperature resistance and salt resistance. It can still have a good ability to reduce water loss and m...
    Read more
  • Petroleum grade CMC-LV (petroleum grade low viscosity CMC)

    In drilling and oil drilling engineering, good mud must be configured to ensure the normal operation of the drilling. Good mud must have appropriate specific gravity, viscosity, thixotropy, water loss and other values. These values have their own requirements depending on the region, well depth, ...
    Read more
  • Battery Grade Cellulose CMC-Na and CMC-Li

    CMC Market Status: Sodium carboxymethyl cellulose has been widely used as a negative electrode material in battery manufacturing for quite a long time, but compared with the food and drug industry, construction industry, petrochemical industry, toothpaste production, etc., the proportion of CMC u...
    Read more
  • Application of CMC in Oil and Gas Industry

    During drilling, drilling and workover of oil and natural gas, the well wall is prone to water loss, causing changes in the well diameter and collapse, so that the project cannot be carried out normally, or even abandoned halfway. Therefore, it is necessary to adjust the physical parameters of th...
    Read more